Description
Flexible, high-temperature ducting for getting cool air where you need it: to the brakes, the air filter or a hot corner of the engine bay. It bends tightly around suspension parts and bodywork without collapsing, so you can route it where rigid pipe won’t go.
The wall is a hard-wearing orange silicone outer over a glass-fabric inner, held open by a bronze-coated steel spiral. It is rated from -60°C to +260°C.
Choose your size when ordering
| Inside diameter | 500 mm | 1 m | 2 m |
|---|---|---|---|
| 25 mm (1″) | £10.99 | £20.99 | £39.99 |
| 51 mm (2″) | £12.99 | £26.99 | £44.99 |
| 76 mm (3″) | £14.99 | £28.99 | £48.99 |
Features
- Colour: orange
- Hard-wearing silicone outer
- Glass-fabric inner layer
- Bronze-coated steel spiral keeps the bore open on bends
- Operating temperature -60°C to +260°C
- Flexible and easy to route around suspension and bodywork
Uses
- Brake cooling, from a bumper or NACA intake to the disc
- Cold air feeds to an air filter
- Engine bay and component ventilation
- Track, race, kit and project cars
In the box
- 1 x length of silicone ducting in your chosen diameter
Fitting
Cut to length with a sharp knife, then snip the spiral with side cutters. Push it over the duct spigots and secure with hose clips (not included). Our VX NACA ducts take the 51 and 76 mm sizes.