Description
M135i brake cooling kit: coming soon
Price and launch date to follow. Register your interest and tell us whether you’d want the complete kit or the adapters only. The images are design renders and an airflow simulation; photos from the car will follow.
More cold air to the front brakes, from the bumper straight to the disc.
The Airifix brake cooling ducts replace the factory brake air guides on the pre-LCI M135i. They take air from the lower bumper intakes and feed it through a large, smooth bore to the centre of the disc. Each duct was designed from a 3D scan of the factory part, so it fits the original space and mounting points.
Choose the complete kit with ducting and backing plates (63 mm / 2.5" only), or the duct adapters alone in 2" or 2.5" to suit the hose and backing plates you already run.
Engineered to solve real problems
| Problem | How the shape solves it |
|---|---|
| Small outlets starve the brakes of air | A large 57 mm bore and a 63 mm (2.5") hose outlet move much more air at the same speed |
| Sudden steps in the duct waste airflow | The square inlet blends gradually into a round pipe, with no steps or ledges in the bore |
| One long duct is hard to get past the crash structure | Two pieces that push together, with a self-centring cone joint |
| Lining a bolt hole up behind the bumper is fiddly | An open fork with a flared mouth slides straight onto the crash-box stud, then you tighten the nut |
| Every car is slightly different | The fork slot gives ±6 mm of adjustment along the mount |
| Hoses work loose | A raised bead on the outlet with a clamp band behind it keeps the hose on |
| Aftermarket ducts foul other parts | Designed from a 3D scan of the factory duct and kept inside the original space with clearance |
What’s in the box
Everything is supplied as a left and right pair.
| Item | Complete kit (2.5") | Adapters only (2" or 2.5") |
|---|---|---|
| Inlet duct (Part A) | 2 | 2 |
| Pipe with mount fork (Part B) | 2 | 2 |
| 63 mm silicone/fibreglass ducting | 2 m (cut to length, about 0.5 m per side) | – |
| Backing plates with 63 mm inlet | 2 | – |
| Hose clamps | 4 | – |
| Washers for the crash-box stud | 2 | 2 |
| Fitting guide | Yes | Yes |
Fitment and specs
Fits the BMW M135i pre-LCI (F20/F21, 2012–15) only. It does not fit LCI cars or the M140i.
| Spec | 2.5" / 63 mm | 2" / 51 mm |
|---|---|---|
| Hose outlet (outside / bore) | 63 / 57 mm | 51 / 45 mm |
| Simulated airflow at 120 km/h | about 81 L/s | about 51 L/s |
| Mounting | Front bolt + crash-box stud | Front bolt + crash-box stud |
| Adjustment at the mount | ±6 mm | ±6 mm |
| Material | ASA | ASA |
| Wall thickness | 3 mm | 3 mm |
Each duct is designed from a 3D scan of the factory part. We simulated the airflow in OpenFOAM at 120 km/h ram pressure, and the 2.5" outlet flowed about 61% more air than the 2". That simulation covers the duct only, not the hose or backing plate. Developed and fitted on our own car, @project_m135i_ai.
Fitting
- Push the pipe (Part B) into the inlet duct (Part A) until the cone joint seats.
- Put the nut loosely on the crash-box stud with a washer.
- Offer the duct up and slide it back so the stud enters the fork, then fit the front bolt.
- Slide the duct until it sits without strain and tighten the nut.
- Push the hose over the bead and clamp it in the band behind it, with the clamp screw turned away from the fork.
- Route the hose to the backing plate with slack for full steering lock and suspension travel.
FAQ
Does it fit the LCI M135i or the M140i?
No. The bumper and mounting points differ, so it is pre-LCI only.
Do I need backing plates?
Yes, the duct needs backing plates to deliver air to the disc. The complete kit includes them. With adapters only, use your own backing plates with a 51 mm or 63 mm inlet.
Why is the complete kit 2.5" only?
A 63 mm hose moves far more air than a 2" one. A 3" outlet would not fit inside the factory space.
How long does the hose need to be?
About 0.5 m per side, including slack for steering and suspension.




