XN1: Our New Cold Air Intake for the MINI N14 and N18
Meet the XN1: our new cold air intake for the MINI N14 and N18. It’s designed for cars that keep their MAF sensor, and the first run is limited to 100 kits.

Why we made it
Our air filter relocation kit has been on plenty of Gen 2 MINIs, but it doesn’t suit cars with a MAF sensor or the N18 engine. We kept getting asked for something that did. The XN1 is that answer: a sealed cold air intake built around the MAF-equipped N14 and N18.

What’s in the kit
- A one-piece cover (box and seal) printed in ABS
- A pipe printed in PA6-CF, a carbon-fibre reinforced nylon that’s stiff and copes with engine bay heat
- A foam filter, fitted last through the rear opening
- A rubber seal and a mounting bracket
Design details
- Angled spigot. The outlet rises 15ยฐ to line up with the standard intake pipe, so there’s no strain on the joint.
- Slide-off cover. The cover slides rearward off the pipe, so you can get to the filter without unbolting the whole kit.
- One drain. A single drain at the bottom of the box lets any water out.
- Clean finish. The XN1 logo is raised on top, and the inside edges are chamfered to keep the airflow smooth.


How the air moves
While designing it, we modelled the airflow through the kit at full load. In that model the air slows to around 5 m/s in the box and passes gently through the filter, then speeds up to around 45 m/s in the spigot on its way to the engine.
This is an indicative model of the airflow path. It’s not a full CFD study or a dyno result, and we’re not claiming a power gain from it.

First run: 100 kits
The first run is limited to 100 kits. If you’d like one, get in touch to register your interest and we’ll let you know as soon as they’re ready. Price and launch date to follow.
Fits: MINI Cooper S and JCW with the N14 or N18 engine and a MAF sensor. Not sure which you have? Message us with your registration and we’ll check.